Double Glazing Lock Repairs

Quality locks on your windows and doors will stop burglars from getting into your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.

Some double glazing owners, however, have experienced problems with their door or window lock after the installation. Luckily, these problems are usually fixable and don't require to buy new double glazing.

Broken or damaged locks

If your uPVC window or door lock is broken or faulty and requires a locksmith, they can fix it. They can repair the striker plates, hinges and locks on your double glazing. They can also move the cylinder around to fix any misalignment issues that may be causing your handle to not operate correctly.

If the key fits in the lock but it won't turn or is difficult to insert then the mechanism may be seized up. The dirt or grease could be trapped in the mechanism. If this is the case, then it is possible to clean the lock and lubricate it. Make use of a dry lubricant, such as graphite or teflon but not oil as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating the lock, you must insert the key and then try to turn it. The lubricant must work its way into the mechanism, and the lock should turn effortlessly.

A malfunctioning lock could be caused by loose screws in the lock mechanism. They can become loose and fall out or break completely which can stop the lock from functioning properly. These screws can be tightened with the help of a screwdriver. However, be careful not to over tighten them. This could cause damage to the internal components.

A broken lock can be dangerous for both you and your family members especially if you have young children. It is possible for them to open the door without you knowing, and this can give them access to your home. If you're worried that this could occur, a licensed professional locksmith can help you to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix any type of defective and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also alter the locking system of your upvc repair windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.

Handles that are broken or are damaged

As part of their overall security package, many double-glazed windows have a multipoint lock. This is an excellent option for those who are worried about opportunistic burglars trying to gain entry into their home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted with the locks that are already in place to ensure that your window is locked in the closed position.

It's not uncommon for handles to be damaged or fail - they are the first component of your window that will be pushed open by criminals intent on breaking into. The good news is that this is one of the most simple parts to repair.

Modern uPVC handles and aluminum handles come with the multi-point locking mechanism referred to as Espagnolette, which is designed to ward off forced entry. This security upgrade is often provided as an additional option on new upvc window repairs window installations. As an optional upgrade, older aluminium or uPVC handles that are no longer in use can be upgraded to the shoot bolt locking system.

If a handle is defective, it's important to get this repaired as quickly as possible. Faulty handles may prevent the window from closing properly and allow drafts to enter. It could also be a vulnerability that opportunistic thieves could exploit, putting your family's belongings and you at risk.

The process of fixing the malfunctioning mechanism begins by opening the window frame and removing the damaged handle. The gearbox that opens the handle is then accessed and the type identified so that a replacement can be sourced which matches the profile of the internal window frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. However, we suggest replacing them with more long screws since they provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further corrosion. After this step is completed, your window should be fully functional again at a fraction the cost of replacing it.

Hinges that are broken or faulty

If your windows don't close correctly, draughts may get in, your home's security measures will be compromised and you run the risk of water damage or damp. Broken or damaged window hinges are a common issue and can be repaired easily.

If you have a uPVC windows that won't close or open it's likely that the hinges are broken or damaged and require replacement. Many window companies will require you to purchase an entirely new window unit to fix this simple problem, but we can replace the hinges and save you money.

Window hinges can be damaged through repeated use, or weakened over time by corrosion. In the event of a broken hinge, it is important to take precautions to avoid further damage by being careful not to push the window open or closed.

Knowing the type of hinge you have will help you locate the right parts to repair it. Maco, Mila and Roto are all manufacturers of window hinges. Get advice from a professional before buying parts that do not fit with your existing hardware. This can result in more damage.

Faulty hinges are a major issue for uPVC doors and windows. They can be a significant source of noise, and they can also allow water infiltration which could damage your windows.

To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If it isn't then tap the head pin with a hammer to make a shallow bend in the barrel of the hinge. This will help to keep the pin in the right position. Ask a second person to hold the door while you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with those that are the same size and install the screws with glue. Finally fix the hinges using clamps or weights until the glue dries.

After you have fixed your hinges, you can install the door again. You can also attach the handle. It is a good idea to replace the screws with the same length of dowels as the original screw so that they align with each one.

Glass that is broken or is damaged

While uPVC windows do an excellent job of keeping the cold out and heat in, they may become damaged over time. This can be the case with broken or damaged glass as well as defective locks. This is a problem that can be very expensive if not addressed. It also can detract from the aesthetics of your house and may lead to a loss of insulation, which is why it is essential to fix any damage as quickly as you can.

If the glass is cracked but not shattered it is usually possible to repair it yourself using the appropriate tools and techniques. First, make sure that the area surrounding the glass is clean to ensure that any shards do not injure anyone and aren't an accident hazard. Then, take any broken pieces and dispose of them appropriately. Then, put masking tape to the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane before adhering it to the wall is recommended in the case of a window that has two panes. This will ensure you have enough space to finish your project.

Use a clean, dry cloth to clean the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing times that can differ from product to product. You may have to clamp the cracked glass using clamps that are lightweight and designed to hold delicate materials, depending on the angle.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Avoid bending the glass as you install it again in order to weaken the seal. This could result in condensation or water infiltration.

If you have a glass window that's broken completely or has bigger cracks, call an experienced professional glazier such as O'Brien(r) to arrange a replacement. If you leave broken glass unattended, it could be a risk to pet and children It's therefore essential to act fast.