Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. However when windows with double panes are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need open the window so that you can access the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. Most often, upvc window repairs near me window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking used previously may require removal before a new layer can be applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc door repairs near me windows are stiff to open, or loose and open with ease, it may be hinges at fault. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to inadequate installation at the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear can become misaligned, this causes a gap to form between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. The interlock may be misaligned. This happens on the hinge side and Upvc Door Repairs Near Me may need to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and Upvc door repairs near me keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is cheaper to replace them instead of fixing them. If you have any problems with your Upvc Door Repairs Near Me window you should consult a professional as soon as you can.