Double Glazed Window Repair

It's worth looking over the warranty that comes with double-glazed windows in the majority of cases. It usually covers issues with window hardware, such as hinges and locking mechanisms, in the first 10 years.

A break in the seal is typically the reason for mist to form between your glass windows. This issue must be fixed immediately to avoid damp or UPVC window repair mould growing in your home.

Condensation Between the Windows

If you notice condensation forming between your windows, it is an indication that the sealing in the insulating gases has failed. This is a serious issue that should be addressed immediately, especially in winter when humidity is at its highest. It could also cause damage to sills, sealant and mould.

Ideally double-glazed windows shouldn't be able to experience condensation between the panes. This could be caused by high humidity or a very cold snap. This problem is usually resolvable without the need to replace an entire window. A professional can make small holes in the glass and spray the inside of the window with a specially-formulated cleaning solution. The water is then removed from the window and an anti-fogger is installed to stop the build-up of moisture in the future.

Condensation can also occur between windows due to air leakage, or other causes outside the window. In this scenario it could take longer for the moisture inside the window to build up because the air must be warm enough to vaporise the water molecules. In these cases, it is better to replace double-glazed windows rather than attempt to repair the sealed units.

A double-glazed windows is made up of three or two pieces of insulated glass held together by a metal frame. The gap between the two of the windows is filled with a non-toxic gas for insulation such as argon or krypton and then sealed tightly. The seal prevents the gases that are insulating from escape and also blocks moisture and air from getting into the gap.

As windows age, seals deteriorate allowing moisture to leak between the glass panes. It is important to recognise the signs of leaks in the seals and this means that the double glazing isn't performing as well as it did in the past. This can lead to an increase in energy efficiency, increased heating bills, damage to property and the possibility of condensation developing between the windows.

Mist

If you see condensation on the outside of your windows, this is normal and indicates that your double glazing is working well and keeping the heat inside your home. The condensation happens because the outside air is hotter than the glass, and then reaches the dew point of the window earlier than the air inside. Double glazing of top quality is a fantastic way to accomplish this.

If the condensation is on the inside of your window then this can be a sign of a ventilation issue in your home. This is because the extra moisture has nowhere to go and is deposited on your window as well as in carpets, on furniture and other areas around your home. Getting this checked out by a professional and making sure that there is plenty of fresh air flowing through the home will help prevent it from happening in the future.

Another reason for mist to appear on double-glazed windows is because the seal between two panes of glass has broken. This could be due wear and tear or chemical cleaning solutions that are being used. If this occurs the best solution is to repair the windows as soon as possible.

Repairing your windows professionally will ensure that they remain clear of fog free of condensation, and free of misting. It is also a lot less expensive than replacing them entirely and will save you money on your energy bills.

A FENSA-registered window installer can give you a quote to repair or replace your double-glazed windows. If your existing windows are quite old and have been used for a long time you might want to consider upgrading them to new A-rated energy efficient windows.

It is recommended to keep copies of any agreements and warranties with the window installers. This will be very useful in the event that any issues with your windows occur in the future, and you then contact your window fitters to resolve the issue. This is a much better option than ignoring the problems that will only get worse and could lead to other issues in your home.

The difficulty of opening or closing the door

If double-glazed windows become difficult to open and close, it's not just a nuisance but it could also result in increased energy bills due to heat loss and draughts. It could also be a security problem especially when the locks aren't operating correctly. It is crucial to address any issues with double glazed windows and doors as soon as you discover them.

If you're unable to open your windows and have tried the simplest solution such as using a screwdriver to pry it open or tapping around the frame with a tough object, then the issue might be more serious. It could be that the window has moved within its frame and requires to be re-set or it could be that there is gaps between the glass panes and frames. In either of these scenarios, you must call in an experienced double glazing repair expert to make sure that the right repairs are made and to avoid any future issues.

It is not common for UPVC window handle and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is caused by the accumulation of grease or dirt inside the handle. It can be solved by cleaning it using a upvc windows repair cleaner. If this doesn't work then you could try gently tapping the uPVC frame with a hard object like a screwdriver, taking care not to damage the handle or the window handle mechanism.

If this doesn't resolve the problem then the window may have to be replaced, since it is likely that the hinges aren't more in the proper position or the locking mechanisms are damaged. In this case you should consult a specialist UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed door and window repairs, including repairing a double-glazed window that has jammed or been locked shut. He has plenty of experience in converting older window mechanisms into modern. This could save you money by replacing the entire window. Contact us today for more details or a free estimate.

Warping

Double-glazed windows can be an excellent way to save energy in your home. They are made up of two distinct panes with a spacer, air or dense gas between the panes. This creates an airtight seal that keeps cold air out and warm air inside. However, over time, windows can be damaged or broken and require repair. The majority of these repairs can be done without the need to replace the entire window.

Warping is a frequent issue when double-glazed windows are installed. This occurs when the windows begin to bow, bend, or twist, which may alter the strength of the window as well as its ability to insulate. Double glazed windows should be properly installed and maintained to avoid this issue.

Contact a specialist when you notice that your double-glazed windows are sagging. This will help to keep the issue from getting worse. They can inspect your windows to determine the root cause. They will use special tools to correct your problem and ensure that you windows are fully sealed again.

Water vapour can trigger this issue because it can build up between the windows over time. This can be caused a number of different factors, such as the weather, humidity and temperature variations. To address this issue the expert will drill a tiny hole to let out moisture. They will then use an agent for cleaning to wash the glass and apply sealant to help protect it from moisture in the future.

If your windows aren't able to be opened or shut, it could be due to a damaged mechanism or hinges. Before calling a professional to address the issue, it's worthwhile to grease the parts. This can often resolve the issue and decrease your need for replacements. If your windows are dated or do not provide the insulation you want It may be better to replace them.